100 days Free returns on the GridZeno Dongle. Try it on your own system. If it doesn't fit, we take it back and pay the shipping.
Compatibility · Ready for GridZeno

Growatt MOD TL3-HU with GridZeno.

The battery is controlled with Growatt's VPP protocol: a command with power and duration, which the dongle removes itself when the block ends. Applies to MOD 3000-15KTL3-HU.

01

What GridZeno can do on Growatt MOD TL3-HU

Growatt MOD TL3-HU on the compatibility list, updated 31 October 2026.

  • Live overview of solar, consumption and gridAll subscriptions
    Works
  • Battery state of chargeAll subscriptions · requires a battery
    Works
  • Stop selling at negative pricesSmart and Pro · Requires the installer to have turned export limiting on in the inverter. GridZeno only lowers a limit that's already set.
    Works
  • Charge from the grid when power is cheapSmart and Pro · requires a battery · Requires Growatt's VPP protocol V2.01 in the inverter's firmware. Without it, GridZeno can only read and limit the export.
    Works
  • Discharge the battery when power is expensivePro · requires a battery · Requires Growatt's VPP protocol V2.01 in the inverter's firmware. Without it, GridZeno can only read and limit the export.
    Works

Works: tested and measured on real hardware.

02

How the inverter is controlled

The dongle controls the battery with Growatt's VPP protocol.

Charge, hold and sell
A command with the battery's power and a duration. The dongle removes it itself when the block ends, and after a restart.
What it requires
VPP V2.01 in the inverter's firmware. Without it, GridZeno can only read the inverter and limit the sale.
Stop selling at negative prices
The inverter's export limit is set quarter by quarter by the selling price, but only where the installer has turned export limiting on. GridZeno only lowers a limit that's already set and never turns it on or off.
Another controller
If another system already has a VPP command on the inverter, the dongle leaves it alone and doesn't control the inverter.
Manual
When the control is on Manual, the dongle changes nothing on the inverter. It reads, and if GridZeno has changed something, it puts the inverter's own settings back, including your own charge limits.
03

What is special about the Growatt MOD TL3-HU

The type code 5401, MOD 3-15KTL3-HU. The dongle reads it with the MOD TL3-XH map and knows it's a MOD and not a MID because you choose MOD when you set up GridZeno.

What it requires
VPP V2.01 in the inverter's firmware (holding 30099 = 201).
Lowest charge level
Holding 3067, when it answers. It's raised only when the battery's charge level is above the new limit.

How it differs from MID-HU

MOD TL3-HU is the smaller of the two: MOD 3000-15KTL3-HU, 3-15 kW. MID-HU covers MID 29.9K-50K-HU and MID 20-30KTL3-HU-L.

They share the type code 5401. The dongle knows it's on a MOD because you choose MOD when you set up GridZeno.

On MOD TL3-HU the COM panel sits between the USB port and AC, with DRMS, BAT and Meter at the top and Para.out, Dry contact and Para.in at the bottom.

See the page about MID-HU

How it differs from its neighbours

  • Growatt MID-HU: The MID-HU has the same type code and the same port, Para.out with pins 5 and 1. The difference is the size, and that you choose MID.
  • Growatt MOD: The MOD TL3-XH has the type code 5400 and is connected with pins 3 and 4 in a 30-pin COM connector.

For the installer: the registers

What the dongle uses over Modbus, if you want to follow along or troubleshoot. Don't change the registers yourself while control is set to Automatic.

Control
The VPP command in 30407-30410: 30408 is the duration, 30409 the power in per cent, 30410 = 1 when charging. 30100 = 1 turns it on. The dongle writes in the order 30408, 30409, 30410, 30100, 30407 and removes it with 30407 = 0, 30409 = 0, 30410 back and 30100 = 0.
Protocol
Holding 30099 shows the VPP version: 201 is V2.01.
Lowest charge level
3067.

From the dongle's firmware and our notes on each inverter, not from the datasheet.

04

How to connect the dongle

Network cable with RJ45 plug. Approx. 25 minutes.

Port
Para.out (RJ45)
Pin
A at pin 5 (485A), B at pin 1 (485B)
Where
In the COM panel on the underside between the USB port and AC, under a waterproof cover with four screws: DRMS, BAT and Meter at the top, Para.out, Dry contact and Para.in at the bottom.

See the full installation guide for Growatt MOD TL3-HU

GridZeno Dongle for Growatt MOD TL3-HU

05

Before you buy

This one works.

Growatt MOD TL3-HU is the inverter GridZeno has been tested on. Check that your model is under MOD 3000-15KTL3-HU, and that a battery is fitted if you want the battery controlled by the electricity price. If it still doesn't suit you, you have 100 days' free return.