Growatt MIN 7000-10000TL-X with GridZeno.

Growatt MIN 7000-10000TL-X on the compatibility list, updated 31 October 2026.

• Live overview of solar, consumption and gridAll subscriptions · Grid and consumption require an energy meter at the grid connection.
  Works
• Battery state of chargeAll subscriptions · requires a battery · The grid inverter has no battery.
  Not possible
• Stop selling at negative pricesSmart and Pro · Requires the installer to have turned export limiting on in the inverter. GridZeno only lowers a limit that's already set.
  Works
• Charge from the grid when power is cheapSmart and Pro · requires a battery
  Not possible
• Discharge the battery when power is expensivePro · requires a battery
  Not possible

Works: tested and measured on real hardware.

A grid inverter without a battery: GridZeno reads it and lowers the export limit at negative prices.

Battery

None. The inverter is a grid inverter without a battery, so there's nothing to charge or sell from.

Stop selling at negative prices

The inverter's export limit is set quarter by quarter by the selling price, but only where the installer has turned export limiting on. GridZeno only lowers a limit that's already set and never turns it on or off.

Grid and consumption

Requires an energy meter at the grid connection that the inverter reads.

Manual

When the control is on Manual, the dongle changes nothing on the inverter. It reads, and if GridZeno has changed something, it puts the inverter's own settings back, including your own charge limits.

The same series as the MIN TL-X for the dongle: the type code 5201, or 5200 when the range from 3000 answers.

Export limit

Without VPP V2.01 through 123. With V2.01 through the pair the installer has turned on: 122 and 123 or 30200 and 30201.

How it differs from its neighbours

• Growatt MIN TL-X: The MIN 2500-6000TL-X is read and controlled the same way, but is connected with pins 3 and 4 in the round SYS COM connector.

From the dongle's firmware and our notes on each inverter, not from the datasheet.

Wires in the inverter's terminal plug. Approx. 30 minutes.

Port

COM (4- or 16-pin connector)

Pin

A at pin 3 (RS485A1), B at pin 4 (RS485B1)

Where

The round connector marked COM on the underside between the PV inputs and USB. The same connector is used for the energy meter, so there may already be wires in it.

See the full installation guide for Growatt MIN 7000-10000TL-X

GridZeno Dongle for Growatt MIN 7000-10000TL-X

This one works.

Growatt MIN 7000-10000TL-X is the inverter GridZeno has been tested on. Check that your model is under MIN 7000-10000TL-X, TL-X(E) and TL-X2. If it still doesn't suit you, you have 100 days' free return.